FRICTION PIPE BOLTS

• KRSz-C-Ø39

Intended use

• KRSz-C-Ø39 - friction pipe bolts are designed for roof and ribs support in mine working areas as an independent or secondary bolting roof support system. They are also used for the attachment of various components of mining equipment.

Technical description

• The bolt rod is made from a section of ø39 mm in diameter and 3 mm thick.
  The cross-section of the rod resembles a cylinder whose edges overlap forming a tube. The upper part of the rod is beveled and appropriately formed while the bottom part has a reinforcing sleeve and a hole for fitting the attachment unit.
  When set in the hole, the bolt is given the required load capacity due to elastic rod structure.
  
• The bolts can be used with square washers of 150 x 150 mm or round Ø137 mm washers made of 6 mm plate.
• 3 x 100 x 100 square wave washer and M12 thread are supplementary elements used for the attachment of various elements of mining equipment.

Technical data

Installation procedure

• Drill a hole of ø38 +0,5 mm in diameter and length equal to the length of the bolt. Preassemble the anchor by placing the washer on the rod.
  Prepare the bolt for installation by inserting the beveled end into the borehole and the sleeve in the socket of the percussion machine with impact energy of 200 ÷ 250 J. The bolt should be hammered in till the washer rests against the rock surface.