Friction pipe bolts type ø33 ø39 ø48 are designed for roof and ribs support in mine working areas as an independent or secondary bolting roof support system. They are also used for the attachment of various components of mining equipment.
Drill a hole of a length equal to the length of the bolt.
Preassemble the anchor by placing the washer on the rod. Prepare the bolt for installation by inserting the end into the borehole and the ring in the socket of the percussion machine with impact energy of 200 ÷ 250 J.
The bolt should be hammered in till the washer rests against the rock surface.
Minimum | Typical | |||
---|---|---|---|---|
Yield Strength |
415MPa |
80kN |
510MPa |
100kN |
Ultimate Tensile Strength of Tube |
510MPa |
100kN |
610MPa |
120kN |
Friction Bolt Diameter |
ø33mm x 2,3 mm |
|||
Hole Diameter Range |
30mm min./32mm max. |
|||
Mass per Metre |
1,53 kg |
Minimum | Typical | |||
---|---|---|---|---|
Yield Strength |
415MPa |
90kN |
510MPa |
115kN |
Ultimate Tensile Strength of Tube |
510MPa |
115kN |
600MPa |
135kN |
Friction Bolt Diameter |
ø39mm x 2,3 mm |
|||
Hole Diameter Range |
35mm min./38mm max. |
|||
Mass per Metre |
1,77 kg |
Minimum | Typical | |||
---|---|---|---|---|
Yield Strength |
345MPa |
120kN |
445MPa |
160kN |
Ultimate Tensile Strength of Tube |
460MPa |
165kN |
510MPa |
180kN |
Friction Bolt Diameter |
ø48mm x 3,2 mm |
|||
Hole Diameter Range |
44mm min./46,5mm max. |
|||
Mass per Metre |
2,86 kg |
(c) arnall.com.pl 2017 kopiowanie oraz rozpowszechnianie opisów zabronione
Projekt i wykonanie strony internetowej - trustnet.pl